Water Treatment Systems

REVERSE OSMOSIS

ERO R335 Reverse Osmosis Drinking Water System How an RO Drinking Water System Provides High Quality Water. Household water is directed through a pre-filter for filtration to remove sediment, chlorine taste and odor, and particulate matter. The water is then forced, by pressure, through a semi-permeable membrane where a high percentage of the dissolved solids, etc. are rejected and flushed to the drain. A final polishing of the water is accomplished by an activated carbon absorption block filter removing tastes and odors. The water passes through this final filtering process immediately before going to the faucet whether it comes direct from the unit or from the storage tank. The automatic shut off control shuts down the system when the storage tank is filled and water is not being drawn. This “demand production” feature conserves water by eliminating the constant running to the drain found in some units. The control also depressurizes the membrane when not in service extending the membrane life. Optional ERO R335 Electronic System. The EcoWater LifeLite electronic monitor system monitors the level of TDS before and after treatment. The monitor will also alert you when it is time to change filters or when service may be needed.

---

ERO-R450E Reverse Osmosis Drinking Water System Features: Unique and elegant chrome ceramic disc faucet Unique and stylish chrome electronic monitor ring under faucet that indicates when membrane/filters should be changed Dual purpose prefilter with coconut-shell carbon to remove sediment, chlorine taste and odor, and particulate matter Industry rated, 50 gallons per day*, high-volume, semipermeable membrane that rejects most dissolved solids Coconut-shell carbon postfilter to remove tastes and odors Automatic shut-off control to balance production of filtered water with your needs

---

ERO B524 Reverse Osmosis Drinking Water System Specifications Feed water pressure (min.-max.) Feed water temperature (min.-max.) Maximum Total Dissolved Solids (TDS) Membrane percent rejection of TDS (min.) Waste water per gal. of product water System product water production rate (gal. per day) Feed water pH limits Maximum iron Maximum manganese and hydrogen sulfide Storage tank capacity Automatic shut off valve 40-125psi 40-100¢ªF 2,000 ppm 90-95% 4 18 4-10 pH 0 0 3.1 gal. yes Typical impurities reduced by an EcoWater Reverse Osmosis Drinking Water System Model ERO-B524 TFC System Arsenic* Barium* Cadmium* Chromium (hex)* Chromium (Tri)* Copper* Cysts* Fluoride* Lead* Nitrate/Nitrite Radium 226/228* Selenium* Turbidity* Ammonia Bicarbonate Bromide Chloride Magnesium Sodium Sulfate Tannin Zinc * Tested and certified by NSF International ERO—B524: For chlorinated and non-chlorinated water supplies. Chlorine levels must not exceed 2.0 ppm

---

ERO-300QS/QSE Reverse Osmosis Drinking Water System Specifications Feed water pressure (min.-max.) Feed water temperature (min.-max.) Maximum Total Dissolved Solids (TDS) Percent rejection of T.D.S. Waste water per gal. of product water Product water production rate (gal. per day) Feed water pH limits Maximim feed water hardness Maximum iron Maximum hydrogen sulfide Type of membrane thin film Pre-filter (turbidity) Post-filter (taste and odor) Storage tank capacity 2.1 gal. Shut off valve (while not producing water) Shipping weight 40-125 psi 40-100¢ªF 2,000 ppm 75%-93% 4 18 4-10 pH 10 grains 0 0 composite 10 micron carbon composite 10 micron carbon composite 2.1 gal. yes 20 lbs. Typical impurities reduced by an EcoWater Reverse Osmosis Drinking Water System Model ERO-B524 TFC System Ammonia Bicarbonate Bromide Chloride Magnesium Sodium Sulfate Tannin Zinc ERO 300QS/QSE: For non-chlorinated water supplies and chlorinated* water supplies with pre-carbon filter. *Chlorine levels must not exceed 4.0 ppm